*   Rudder   *

MM-DD-YYYY

Hours

Photos

Scope of work

03-25-2004

5.0

Spar doubler positioned, drilled and attached

Drilled and attached control horn

Drilled and attached aft ribs

Drilled and attached forward rib

Drilled and attached top rib

Disassembled and deburred all holes

All edges smoothed and corners rounded

03-26-2004

1.0

Primed mating surfaces of the ribs and rudder spar with Zinc Oxide primer

Riveted rudder skeleton together

03-27-2004

8.0

Aligned, drilled and deburred aft skin

Aligned, drilled, trimmed and deburred leading edge skin

Disassembled the rudder

03-28-2004

4.0

Primed the ribs and rudder spar with Zinc Oxide primer

Primed mating surfaces of the aft skin and leading edge skin with Zinc Oxide primer

Assembled and clecoed the rudder together

Riveted the rudder together

Total Time

18.0

Rudder complete until fuselage is built