Metal List, Zenith STOL CH701, scratch build

Please note this list does not include materials for the landing gear.

4130N tube

3’ 2”X0.058

1’ 1 ¼ X 0.058 bell crank sleeve

4’ 1 1/8 X 0.058 Cabin frame header

35’ 1 1/8 X 0.035 (must be 5 pieces 7’ long) struts,controls

2’ 7/8 X 0.058 Cabin frame short tubes, elegant Y grip

2’ 3/4 X 0.065 wheel axles

8’ ¾ X 0.058 Rudder pedals

40’ ¾ X 0.035 cabin frame, engine mount, controls

1’ 5/8 X 0.058 bungee pin

2’ ½ X 0.065 brake pedals

3’ 3/8 X 0.035 throttle rod

1’ 5/16 x 0.058 brake pedals

2’ ¼ X 0.035 controls

1’ ¼ X 0.028 bushing stock.

4130N steel rod

6’ 3/16 throttle rod, hinge pins

2’ ¼ cabin handles

2’ 5/16 nose wheel controls

1’ 3/8 brake pedals

18” X 18” X 0.080

9” X 9” X 0.125

9” X 9” X 0.050

6’ ¼-20 flap controls (as built by skyshop)

3’ 10-32 trim control rod

6061 T6 tube

10’ ¾ X 0.058 cabin frame

48’ ½ X 0.035 (6 PC. 8’) doors, jury struts

2’ ¼ X 0.035 tank vent, pitot tube

2024T3 Aluminum Bar

½” X 1” X 12” flap bell cranks

3/16” X 1 ½” X 12” wing root

¼ X 1/2 X 24’’

6061T6 Aluminum Angle

90’ ¾ X ¾ X 0.093 (may sub. up to 0.125 if needed, 4

PC. 10’6” and 5 PC. 9’6”)

4’ 1 ½ X 1 ½ X 0.125 (only 1’ if using turnbuckles)

1' 1 1/2 X1 1/2 X 0.18 landing gear mounts

6061T6 Aluminum Sheet

15pc. 0.016 4’ X 12’ Min 13 sheets and no errors

3pc. 0.025 4 X 12

1pc. 0.025 4 X 6 for wing tanks

1pc. 0.032 4 X 8

1pc. 0.040 4 X 8

1pc. 0.063 4 X 2

1pc. 0.090 2 X 2

1pc. 0.125 2 X 2