Home
Builder LINKS (16)
Email:
moderator@CH701.com
Alternate Throttle Connections for 701/801/601
These are from Johann G (Iceland) Thanks!
The steel part I had made is drilled in two
places, for the throttle wire and the cotter pin.
Then the end has threads for a small bolt to
hold the throttle wire.
The Throttle type is: A 820 friction lock (solid
wire end) part # 05-09436 3 ft. long.
The measurements for the part are in inches.
I removed the friction block from the firewall,
and am just using something to hold the rod in the centre.
